Tag
1224 free modern 3D models for 3ds Max, ready to drop into your visualization scenes.
1224 models · clear filters
A back-to-back up-and-down escalator pair with pale side panels, dark glass balustrades, brushed handrails and yellow demarcation lines on the aluminium step treads. Detail views show the entry combs, direction indicator and floor-plate lighting. Built in 3ds Max (.max) and shaded for V-Ray, it fits interior visualizations of shopping malls, metro stations, airports and department stores that need a moving-stair run between levels.
A kit of landing and cabin fixtures: brushed-steel face plates with round and square call buttons, red arrow direction lanterns, key switches and several styles of dot-matrix and seven-segment floor position displays. Modeled in 3ds Max (.max) with V-Ray shading, these small props add correct detail to elevator lobbies and cabin walls in architectural visualizations and product close-ups.
An elevator car interior with pale metal side walls, deep blue accent panels around the doors and control station, a polished round grab rail, illuminated ceiling squares and a diamond-pattern checker-plate floor. Separate swatches show the wall and floor textures. Built in 3ds Max (.max) and shaded for V-Ray, it is ready for interior renders of transit stations, hospitals, car parks and industrial buildings where a hard-wearing cabin finish is expected.
A deep, wide service and passenger lift seen from the corridor: pale grey steel wall panels, protective wall rails at two heights, a linear ceiling light layout, a light vinyl floor and a full-height stainless control panel beside the doors. Modeled in 3ds Max (.max) with V-Ray shading, it suits interior visualizations of hospitals, care homes, back-of-house hotel areas and other buildings needing a stretcher- or trolley-sized car.
A passenger lift shown at the landing with brushed-steel doors in a stone-clad wall, and interior views of the car lined in warm reddish-brown timber panels with stainless edge strips, a mirrored ceiling recess and a slim vertical control panel. Created in 3ds Max (.max) and shaded for V-Ray, it works for interior renders of residential buildings, small hotels and offices, and for scenes framed through the open lift doorway.
A landing scene with a stainless steel elevator portal set into a plain wall, plus the dark granite-and-steel cabin interior with grab rail, tiled floor and a wall-mounted control panel with round call buttons and a small position indicator. Modeled in 3ds Max (.max) with V-Ray shading, it fits interior visualizations of commercial lobbies, apartment cores and public buildings where both the waiting area and the car need to be shown.
The inside of a passenger lift car finished in light oak wall panels with a brushed-steel skirting, a full-width mirror above the handrail, a recessed ceiling light panel and a tall stainless call station with a green segment floor display. Built in 3ds Max (.max) and shaded for V-Ray, it is ready for interior renders of office towers, residential lobbies and hotels, or as a background seen through opening lift doors.
A cylindrical observation elevator: a curved glass car with a single sliding door and dark trim ring, running inside a round glazed shaft on a tapered base. Wireframe and structure views show the ring beams and guide columns. Modeled in 3ds Max (.max) with V-Ray shading, it suits atrium and lobby visualizations for hotels, shopping centres and corporate headquarters where the lift is meant to be a focal point.
Three variants of a machine-room-less passenger elevator, each shown as a full hoistway on a concrete pit block: painted steel guide structure, counterweight, car sling and a glazed or panelled cabin. Useful for section cuts through a building core. Built in 3ds Max (.max) and shaded for V-Ray, the set supports architectural visualizations of apartment blocks, offices and mixed-use buildings that need a believable lift shaft in a cutaway.
A compact residential lift with a fully glazed car and shaft in a slim brushed-aluminium frame, the cabin holding a single mirrored control panel and low handrail. A measured plan diagram is included alongside the model. Modeled in 3ds Max (.max) with V-Ray shading, it drops into interior visualizations of multi-storey houses, small offices and boutique retail where a see-through vertical link between floors is part of the design.
A mahogany spiral staircase around a central column, its wedge treads edged by stainless rod balusters and a curved timber handrail. Modeled in 3ds Max (.max) with V-Ray dark-mahogany and brushed-steel shading. A classic space-saver for a compact home render or a mezzanine access study.
A dark walnut staircase with a set of curved winder steps at the base turning into a straight flight, guarded by stainless posts with rod infill and a timber handrail. Modeled in 3ds Max (.max) with V-Ray walnut and brushed-steel shading. A compact stair for a modern hallway render or a townhouse layout.
A dark wenge staircase stepping off a low platform into a switchback flight, its white posts laced with fine steel cables under a broad dark handrail. Modeled in 3ds Max (.max) with V-Ray dark-hardwood, enamel and steel-cable shading. A contemporary stair for a duplex render or a stair-detailing study.
A floating walnut staircase on a mono-stringer, screened along its length by closely spaced horizontal timber slats with a stainless handrail on the wall side. Modeled in 3ds Max (.max) with V-Ray dark-walnut and brushed-steel shading. A warm feature stair for a modern living room render or a mezzanine design.
A spiral staircase wrapped in a curved white screen pierced by an organic cell pattern, its dark treads winding around a central post. Modeled in 3ds Max (.max) with V-Ray matte-white metal and stained-timber shading. A sculptural stair for a gallery render or a modern atrium visualization.
A switchback staircase with warm oak treads on a white stringer, screened by laser-cut steel panels in a tangled-branch pattern beneath a dark handrail. Modeled in 3ds Max (.max) with V-Ray oiled-oak, powder-coat and matte-rail shading. A decorative stair for a boutique interior render or a feature-stair study.
A painted timber staircase fitted out underneath with a tall cupboard, open display shelves and pull-out drawers, its risers picked out in teal against white balusters. Modeled in 3ds Max (.max) with V-Ray satin-paint and textured-plaster shading. A space-saving stair for a family home render or a joinery proposal.
A compact modular staircase with a quarter-turn start, its bleached-oak treads clamped to a central steel spine and a light metal balustrade of thin balusters. Modeled in 3ds Max (.max) with V-Ray whitewashed-oak and pale-metal shading. Built for a small apartment render or an attic-conversion layout.
A dark wenge staircase that steps off a broad low platform and switches back, guarded by white posts strung with thin horizontal rods under a dark timber handrail. Modeled in 3ds Max (.max) with V-Ray dark-hardwood and enamel-post shading. Suited to a contemporary house render or a staircase configurator.
A switchback stair on a black steel stringer with solid dark treads, a glass-panel balustrade and a slim stainless handrail turning at the half-landing. Modeled in 3ds Max (.max) with V-Ray matte-lacquer, clear-glass and brushed-steel shading. A clean stair for a modern townhouse render or an office fit-out.
A run of exterior balustrade with clear glass panels clamped between timber-capped stainless posts, set on a tiled parapet against a street facade. Modeled in 3ds Max (.max) with V-Ray tempered-glass, oak-cap and brushed-steel shading. A railing set for a terrace render or an urban facade study.
A spiral staircase whose outer stringer curls upward like a continuous ribbon, carrying dark mahogany treads around a slim chrome column under a glass floor opening. Modeled in 3ds Max (.max) with V-Ray rosewood-tone timber and polished-metal shading. A compact sculptural stair for a modern loft or studio render.
A floating staircase of thick dark-oak treads wrapping a central landing, held by a frameless glass balustrade in a warm open-plan living room. Modeled in 3ds Max (.max) with V-Ray fumed-oak, low-iron glass and stainless shading. Built for a luxury apartment render or a mezzanine visualization.
A single balustrade stanchion in brushed stainless, its perforated square post threaded with four horizontal rods and topped by a leather-wrapped handrail section. Modeled in 3ds Max (.max) with V-Ray brushed-metal and stitched-leather shading. A component for assembling stair or balcony railings in an interior render.