Tag
138 free floor lamp 3D models for 3ds Max, ready to drop into your visualization scenes.
138 models · clear filters
A single slim stem sweeps up from a small round base and hooks over at the top to hang a tilted bucket-shaped shade that throws light down and out. Shown in three finishes — matte black, gloss white and bright yellow. Modeled in 3ds Max (.max) with V-Ray shading. A compact side-of-chair reading light for contemporary and modern living rooms, home offices and hotel suites.
Slim light-oak legs cross low and splay to the floor, held by a short internal strut, carrying a crisp white cylindrical drum shade on a thin oak stem. The braided cord trails loosely across the ground. Created in 3ds Max (.max) with V-Ray materials. A clean, unobtrusive floor light for Scandinavian and minimalist bedrooms, studies and living rooms.
Two oak tripod floor lamps with black metal collars and a low cross-brace between the legs. One wears an open black wire cage around a bare bulb, the other a soft grey linen tapered shade, so the pair covers both a raw and a cosy look. Modeled in 3ds Max (.max) with V-Ray shading. A flexible ambient light for Scandinavian and contemporary living rooms and reading corners.
A long black double-rod arm swings off a canted post and carries a wide brown fabric drum shade far out over the floor. The post fans into a cage of thin struts that meet a round black disc, keeping the reach balanced. Built in 3ds Max (.max) with V-Ray materials. Made to stretch over a sofa, daybed or lounge chair in modern and contemporary interior visualizations.
The stand is built like a leaning step-ladder — four rungs climbing a splayed A-frame — with a small tapered white shade tipped forward off the top rail. Shown as a pair, one in matte black steel and one in warm oak. Modeled in 3ds Max (.max) with V-Ray shading. A conversation-piece reading light for industrial, loft and rustic living-room renders where the frame is meant to be noticed.
A black baluster-turned lamp body with a gold-lined tapered black shade sits on top of a tall slim black plinth, reading as one continuous column from floor to shade. The gold interior warms the light spilling from the shade. Built in 3ds Max (.max) with V-Ray materials. A dramatic corner or console-flanking piece for luxury and contemporary living-room and hotel-lobby renders.
A single thin black tube bends at a right angle high overhead and drops a black drum shade over the seating zone, with a small pivot knob on the stem. A matching low table lamp uses the same L-bend logic. Modeled in 3ds Max (.max) with V-Ray shading. A quiet floor light for minimalist and modern living rooms where the fixture should almost disappear into the wall behind it.
A spring-tensioned aluminium arm on a polished disc base lets a tapered off-white shade extend far over a chair or fold back near the post. Shown reaching out and standing upright so both working positions are visible. Assembled in 3ds Max (.max) with V-Ray materials. A flexible task-and-reading lamp for home offices, studios and modern living rooms that need light placed exactly where it is wanted.
A single walnut pole with a black metal tripod foot and a black metal collar, carrying a tilted cone shade that aims light forward and down. The lean of the pole and the tip of the shade give it a casual, sketch-like stance. Modeled in 3ds Max (.max) with V-Ray shading. A reading light for Scandinavian and contemporary living rooms, placed beside a lounge chair or sofa arm.
Two parallel polished chrome posts rise from a rough stone slab base and split around a black tapered rectangular shade. The mix of mirror metal and raw stone is the whole idea. Built in 3ds Max (.max) with V-Ray materials. A crisp floor light for modern and contemporary living rooms and lobbies that pair polished and rough finishes.
A tall block base clad in a patchwork of salvaged painted timber and metal offcuts supports a large rectangular charcoal shade on a thin stem. A lower table version uses the same reclaimed cladding on a horizontal chest. Modeled in 3ds Max (.max) with V-Ray shading. A characterful floor-and-table set for rustic, coastal and eclectic loft interiors where the base is as much of a feature as the light.
Three tall soft-fabric column lamps in navy, taupe and white, each a loose gathered sleeve that drapes over three splayed feet and glows warmly from inside. The fabric folds differently on every one. Created in 3ds Max (.max) with V-Ray materials. A relaxed ambient light for a bedroom, reading corner or lounge in contemporary interior renders where the lamp should feel textile rather than hard.
A chrome stem threaded with stacked dark wood spheres carries a black drum shade, shown beside a matching table lamp on a green cabinet with a framed photograph on the wall. The wood beads give the slim stem some weight. Modeled in 3ds Max (.max) with V-Ray shading. A coordinated floor-and-table pair for living-room and hotel-suite renders that want warm accent light with a bit of texture.
A tapered arm hinges off a slim post on a flat disc base and reaches a long way out to a wide white drum shade, held level by the geometry of the joint. The stem and arm are matte dark grey, the shade brightly lit. Built in 3ds Max (.max) with V-Ray materials. Made to arc over a dining table, desk or lounge chair in modern and contemporary interior visualizations.
A sweeping steel arc finished in dark chrome carries a glossy black half-dome shade out over the room, balanced by a black cylindrical weight and a round base. The bulb glints through the open mouth of the shade. Modeled in 3ds Max (.max) with V-Ray shading. Sits behind a sofa in mid-century and modern living-room renders where the light needs to hang over a seating area without ceiling wiring.
A black column carved into a slow spiral twist rises from a round disc base to a crisp white empire shade. The matte black stem against the pale shade gives it a graphic, almost calligraphic profile. Built in 3ds Max (.max) with V-Ray materials. A sculptural reading lamp for transitional and contemporary living rooms that want one shapely floor piece beside a sofa or console.
A pair of aged-brass searchlight heads on adjustable black-and-brass wooden tripods, standing in a raw concrete corner. Each cylinder houses a frosted lens with a carry handle and pivot yoke, styled after cinema and marine lamps. Modeled in 3ds Max (.max) with V-Ray shading. A statement floor light for industrial lofts, studios and bar interiors where the fixture is meant to look salvaged.
A counterweighted balance arm pivots on a slim vertical post and carries a round task head that tilts to aim the light. Shown in matte black on a disc base and in chrome on a perforated round foot. Assembled in 3ds Max (.max) with V-Ray materials. Built for a reading chair, desk-side or hobby corner in modern and industrial interior renders that need precise adjustable light.
A flat glossy disc shade — black on one lamp, cream on the other — perches on a tall tapered tripod of pale ash, with a red fabric cord snaking down the leg. The disc shade sends light both up and down. Modeled in 3ds Max (.max) with V-Ray shading. A design-led floor light for contemporary lounges and studio interiors where the coloured cord is meant to be seen.
A three-point wire tripod with a brass-toned arm that angles up and over to a tilting bell-dome shade. Shown in a black-frame version with a brass arm and an all-white version, both with the bulb visible under the cup. Built in 3ds Max (.max) with V-Ray materials. A slim directional floor light for mid-century living rooms and reading nooks where the frame should stay graphic and open.
A straight oak pole leans on a round oak base while a long horizontal arm cantilevers out to a small navy fabric drum shade. The whole thing is pared back to two rods and a shade, with the cord dropping to the floor. Modeled in 3ds Max (.max) with V-Ray shading. Good over an armchair or bedside in Scandinavian and contemporary interiors that want a light source reaching in from the side.
A tall square column lamp with a dark timber frame and warm white grid panels, glowing softly in a room corner beside a sheer curtain. The lattice throws a gentle checked pattern of light onto the wall and floor. Created in 3ds Max (.max) with V-Ray materials. A calm ambient light for a living room, entry or meditation corner in Japandi and contemporary interior renders.
An aluminium counterbalanced arm on a slim post lets a large tapered parchment shade swing far out over a workspace, then fold back close to the stem. Shown extended and retracted so both poses are covered. Modeled in 3ds Max (.max) with V-Ray shading. Well suited to a home office, drafting corner or lounge chair in modern and loft interior visualizations that need adjustable task light.
A polished chrome stem rises from a heavy round base, jogs sideways on a short bracket and carries a black drum shade out over the floor. The offset arm keeps the light forward of the base without a full arch. Built in 3ds Max (.max) with V-Ray materials. Fits a modern living room or reading corner where an arc lamp would be too wide but the light still needs to clear a chair or side table.