Tag
542 free dining room 3D models for 3ds Max, ready to drop into your visualization scenes.
542 models · clear filters
A compact tub armchair on a honey-toned oak frame, the curved crest flowing into short shaped arms above sabre back legs. Its low back pad and box seat are covered in a soft grey-blue watercolour floral. Built in 3ds Max (.max) and shaded with V-Ray for the golden oak and printed cotton. A dining or bedroom-desk chair for a classic country or provincial interior render.
A barrel armchair in a near-black stained oak, the curved back broken by three small pierced circles set below the crest. A burgundy geometric-print cushion fills the seat, and the square legs taper to the floor. Modeled in 3ds Max (.max) with V-Ray for the dark open-grain timber and patterned weave. A dining or club chair for a classic restaurant, library or lounge render.
A solid-walnut dining armchair with a sculpted crest that flows into gently tapering arms and a softly bowed back rail. The recessed seat is a cream leather pad, and the four rounded legs splay outward from the frame. Built in 3ds Max (.max), rendered with V-Ray for the continuous walnut grain and smooth leather. A refined dining or occasional chair for a contemporary or warm-minimalist interior render.
A barrel-back armchair whose walnut crest rail sweeps in one unbroken curve down into the arms and front stiles. A padded back panel and box seat in a plain sand fabric sit within the frame, braced by side stretchers over tapered legs. Modeled in 3ds Max (.max) with V-Ray for the warm walnut grain and matte upholstery. A dining or writing chair for a classic study or hotel-room render.
A barrel-back armchair with a continuous curved crest rail in dark walnut, a small pierced twin-loop splat at the centre back and slim square legs that taper and splay. The dropped-in seat is covered in a cream diamond-lattice fabric. Built in 3ds Max (.max), rendered with V-Ray for the rich walnut and woven seat. A desk, occasional or dining-accent chair for a classic study or living-room render.
An armless dining chair with a shaped wingback, deeply diamond-buttoned across the back and a plump padded seat, upholstered in a rich navy velvet. A line of silver nailheads follows the wing edge, and the tapered legs are dark stained wood. Built in 3ds Max (.max) and shaded with V-Ray for the buttoned velvet pile and studded trim. A set of statement dining chairs for a classic or transitional dining-room render.
A tall host chair with sloping wing sides and short arms, fully covered in a beige linen and outlined along every edge with a double row of polished nailheads. Dark stained sabre legs splay front and back. Built in 3ds Max (.max) and shaded with V-Ray for the plain weave and studded trim. A carver or dining-end chair for a classic dining room or private-club render.
A neoclassical armchair with a silver-grey painted frame, scrolled arm ends and fluted, turned front legs. The gently curved back, seat and arm pads are covered in a lilac-and-cream wide-stripe satin. Modeled in 3ds Max (.max) with V-Ray for the muted paint and sheen of the striped satin. A pair of dining or salon chairs for a light French-classical interior render.
A high-back armchair with a tall button-tufted back in charcoal-grey velvet, a slim gold beading tracing its curved outline and the low padded arms. The front legs are champagne-gold turned balusters; the rear legs sweep back. Modeled in 3ds Max (.max) with V-Ray for the deep velvet pile and gilt-finished wood. A statement carver for a formal dining room or opulent-lounge render.
A curved-back dining chair with a cream linen front and a glossy figured-rosewood veneer wrapping the outer back, small nailheads marking the seat corners. Four gently tapered legs continue the dark wood. Built in 3ds Max (.max) and shaded with V-Ray for the flamed veneer and plain linen. A polished set chair for an upscale dining room or private-dining render.
A Rococo side chair finished in glossy black lacquer, a small carved shell centring the crest above a padded oval back. Back and seat are covered in black leather edged with silver nailheads, and the cabriole legs are slender and scrolled. Modeled in 3ds Max (.max) with V-Ray for the high-gloss lacquer and matte leather. A dramatic dining or hallway chair for a monochrome classical interior render.
A dining armchair framed in dark mahogany, the crest rail rolling into small carved scrolls at the arm ends. Cream leather covers the lightly tufted back and the seat, and the chair stands on slim splayed sabre legs. Built in 3ds Max (.max) and shaded with V-Ray for the polished mahogany and smooth leather. A refined carver for a traditional or transitional dining-room render.
A high tufted dining wing chair upholstered all over in a warm coral-terracotta velvet, the shaped back buttoned into diamonds and finished with small flared wings. It rests on dark-stained splayed sabre legs. Modeled in 3ds Max (.max) with V-Ray for the saturated velvet and dark timber. A bold head-of-table or bedroom accent chair for a modern interior render.
A compact barrel-back dining chair whose curved back and seat are worked in a deep diamond tuft, upholstered in a taupe-grey velvet with a rolled top edge. Four round tapered legs in mid-brown wood splay gently outward. Built in 3ds Max (.max) and shaded with V-Ray for the tufted velvet and warm timber. A soft carver for a modern dining room or boutique-hotel render.
A high-back dining chair with a curved shell upholstered in warm brown leather, a shallow notch cut into the top of the back. A polished stainless steel frame runs down into four slim splayed legs. Modeled in 3ds Max (.max) with V-Ray for the supple leather and mirror-finish metal. A sleek chair for a contemporary dining room or executive-lounge render.
A curved-back dining armchair upholstered in a soft oatmeal chenille, the low arms flowing from the shoulder line down to a thin bright piping at the seat rail. It stands on splayed burled-wood legs tipped with slim metal caps. Built in 3ds Max (.max) and shaded with V-Ray for the flecked chenille and figured timber. A comfortable carver for a modern dining room or hotel-restaurant render.
A neat dining chair in medium walnut with a Gothic-arch lattice worked into the open back rail and a plain drop-in seat in white leather. Square tapered legs, lightly splayed at the rear, joined by side stretchers. Built in 3ds Max (.max) and shaded with V-Ray for the walnut and smooth leather. A refined set chair for a traditional or transitional dining-room render.
A carved side chair in warm walnut, its shield back and seat covered in a gold scrollwork damask and bordered with brass nailheads, with acanthus carving on the crest and a shell on the apron. Cabriole legs end in carved feet. Modeled in 3ds Max (.max) with V-Ray for the polished carving and patterned weave. A dining or accent chair for an ornate classical interior render.
A traditional dining chair in mid-brown walnut with a carved band across the top rail, an upholstered back panel and seat both in a beige gold-toned damask. Turned front legs on small pad feet, square raked back legs. Built in 3ds Max (.max), rendered with V-Ray for the walnut and woven damask. A matched set chair for a classic or provincial dining-room render.
A dark walnut armchair with a pierced foliate crown over a shield-shaped back, both back and seat padded in oatmeal linen with a small carved cartouche on the seat rail. Scrolled arms and heavily carved cabriole legs. Modeled in 3ds Max (.max) with V-Ray for the deep walnut carving and linen. A throne-like accent or dining carver for a palatial or heritage-interior render.
A dining wing chair in flax-coloured linen, the tall back diamond-tufted with covered buttons and framed by shallow wings, the whole edge run with bright nailheads. Carved oak cabriole legs support a deep seat. Modeled in 3ds Max (.max) with V-Ray for the linen weave and polished oak. A commanding head-of-table chair for a country-house or transitional dining render.
A tub-style dining chair with a curved barrel back that wraps to low arms, upholstered in dove-grey fabric and outlined with a thin black contrast piping. It sits on four square tapered legs in dark walnut. Built in 3ds Max (.max), rendered with V-Ray for the fabric and piping detail. A comfortable carver for a modern dining room or hotel-restaurant render.
A tall, slightly reclined dining chair covered in a bronze-brown woven textile with a fine metallic grid, the back a single tapering panel over a compact seat. Slim dark-stained wood legs, the front pair straight, the rear swept. Modeled in 3ds Max (.max) with V-Ray for the shimmering weave and dark timber. A statement chair for an upscale restaurant or formal dining-room render.
A rounded-shoulder dining chair upholstered all over in a pale blush velvet, the back lightly button-tufted, the seat wide with a small waterfall front. Four tapered natural-oak legs splay slightly for stability. Built in 3ds Max (.max) and shaded with V-Ray for the velvet pile and light wood. A soft accent or dining chair for a modern feminine interior render.