Tag
451 free armchair 3D models for 3ds Max, ready to drop into your visualization scenes.
451 models · clear filters
A Rococo armchair with a distressed silver-gilt carved frame, its crest, apron and knees worked in shells and scrolls. Back, seat and open arm pads wear a warm gold damask with a large rose pattern; the cabriole legs are slender. Modeled in 3ds Max (.max) with V-Ray for the worn metallic finish and lustrous damask. A period feature chair for a palace-interior or luxury-hotel render.
A neoclassical armchair in ebonised wood, every edge outlined with a fine gold rope and small cast rosettes on the tapered legs. The tall back, scrolled arms and seat are covered in a dark grey woven fabric with a subtle grid. Built in 3ds Max (.max) and shaded with V-Ray for the black-and-gold frame and textured weave. A refined accent or desk chair for an opulent study or salon render.
A deep lounge armchair with an exposed dark mahogany frame, turned stiles and gently curved arms. Loose back and seat cushions in a dark blue-green stripe sit inside it, with a champagne silk scatter pillow; a wireframe view is inset. Modeled in 3ds Max (.max) with V-Ray for the polished mahogany and striped upholstery. A club or reading chair for a British-colonial or transitional living-room render.
A neoclassical armchair with a silver-grey painted frame, scrolled arm ends and fluted, turned front legs. The gently curved back, seat and arm pads are covered in a lilac-and-cream wide-stripe satin. Modeled in 3ds Max (.max) with V-Ray for the muted paint and sheen of the striped satin. A pair of dining or salon chairs for a light French-classical interior render.
A Louis XV fauteuil with a cream-and-grey painted frame, a small carved flower on the crest and shaped apron. The cartouche back and rounded seat are covered in a blue-and-white medallion floral, trimmed with a scalloped braid. Built in 3ds Max (.max) and shaded with V-Ray for the aged paint and printed cotton. A salon or bedroom armchair for a French-provincial interior render.
A high-back armchair with a tall button-tufted back in charcoal-grey velvet, a slim gold beading tracing its curved outline and the low padded arms. The front legs are champagne-gold turned balusters; the rear legs sweep back. Modeled in 3ds Max (.max) with V-Ray for the deep velvet pile and gilt-finished wood. A statement carver for a formal dining room or opulent-lounge render.
A set of three accent chairs sharing a slim antiqued-brass rod frame: one with a charcoal linen back-and-seat pad, one in caramel saddle leather, and a third with a curved wood back over a grey linen loose cushion. Modeled in 3ds Max (.max) with V-Ray for the brushed metal, leather and linen. A coordinated group for a modern living room, lounge or boutique-lobby render.
A tall Baroque armchair in dark mahogany crowded with gilded carving: a pierced foliate crown over the tall back, scrolled arms and a shaped apron all worked in gold. Back, seat and arm pads wear a pale gold damask. Built in 3ds Max (.max), rendered with V-Ray for the two-tone carved frame and woven damask. A throne-like feature chair for a palatial or grand-hotel interior render.
A Louis XV fauteuil in natural carved oak, gilt touches on the crest shell and knee scrolls. A cream fabric printed with a green botanical trailing vine covers the cartouche back, seat and open arm pads. Modeled in 3ds Max (.max) with V-Ray for the pale oak grain and printed cotton. A garden-room or salon armchair for a French country-house render.
A wing-sided slipper chair upholstered in white leather with deep diamond tufting across the back and seat and a scalloped skirt rail. Black lacquered trim outlines the wings and forms the short cabriole legs. Built in 3ds Max (.max) and shaded with V-Ray for the buttoned leather and glossy black frame. A glamorous bedroom or dressing-room accent chair for an interior render.
A low club armchair with a rounded barrel back and a single deep box seat cushion, upholstered in a plain cream fabric. The base is banded in dark wood and carried on four short, angled dark legs. Modeled in 3ds Max (.max) with V-Ray for the matte upholstery and dark timber base. A lounge or reading-corner chair for a modern living-room or lobby render.
A dining armchair framed in dark mahogany, the crest rail rolling into small carved scrolls at the arm ends. Cream leather covers the lightly tufted back and the seat, and the chair stands on slim splayed sabre legs. Built in 3ds Max (.max) and shaded with V-Ray for the polished mahogany and smooth leather. A refined carver for a traditional or transitional dining-room render.
A Louis XVI medallion-back armchair in ebonised wood with gilt-carved rosette blocks and reeded, tapered legs. The oval back, seat and arm pads are covered in a blue ground brocade woven with a gold branching floral. Built in 3ds Max (.max), rendered with V-Ray for the black-and-gold frame and lustrous brocade. A pair of statement chairs for a formal salon or heritage-interior render.
A Louis XVI armchair with a square back and weathered grey-oak frame, small carved rosettes at the top of each fluted, tapered leg. Natural linen upholsters the back panel, seat and padded arm rests. Built in 3ds Max (.max), rendered with V-Ray for the limed oak grain and plain linen. A quiet accent or writing-desk chair for a Provencal or transitional interior render.
A Louis XV fauteuil with a cream-painted frame, gilt rocaille cartouches picking out the crest, apron and knees. Back, seat and arm pads are covered in a mottled grey-green crushed velvet. Modeled in 3ds Max (.max) with V-Ray for the aged paint, gold highlights and velvet pile. A salon or bedroom armchair for a French-classical interior render.
A curved-back dining armchair upholstered in a soft oatmeal chenille, the low arms flowing from the shoulder line down to a thin bright piping at the seat rail. It stands on splayed burled-wood legs tipped with slim metal caps. Built in 3ds Max (.max) and shaded with V-Ray for the flecked chenille and figured timber. A comfortable carver for a modern dining room or hotel-restaurant render.
An ebonised hardwood armchair in the Chinese manner, the back a dense openwork of scrolling vines around a central medallion, the apron and knees deeply pierced and carved. A thin dark leather seat pad sits inside the frame. Modeled in 3ds Max (.max) with V-Ray for the near-black polished wood and its carved relief. A feature chair for an oriental-style study or collector's-interior render.
A dark walnut armchair with a pierced foliate crown over a shield-shaped back, both back and seat padded in oatmeal linen with a small carved cartouche on the seat rail. Scrolled arms and heavily carved cabriole legs. Modeled in 3ds Max (.max) with V-Ray for the deep walnut carving and linen. A throne-like accent or dining carver for a palatial or heritage-interior render.
A tub-style dining chair with a curved barrel back that wraps to low arms, upholstered in dove-grey fabric and outlined with a thin black contrast piping. It sits on four square tapered legs in dark walnut. Built in 3ds Max (.max), rendered with V-Ray for the fabric and piping detail. A comfortable carver for a modern dining room or hotel-restaurant render.
A Louis XV fauteuil in warm polished walnut, its cartouche-shaped back and rounded seat upholstered in plain beige linen, a carved flower centring the crest and apron. Open padded arms sweep down to cabriole legs. Modeled in 3ds Max (.max) with V-Ray for the figured walnut and matte linen. A salon or bedroom-corner armchair for a French-classical interior render.
A weathered-oak carver seen from front and back: an oval medallion back in cream linen with nailhead edging, padded arm caps and a rounded seat, all on turned and fluted legs with carved rosette blocks. Modeled in 3ds Max (.max) with V-Ray for the limed grain and linen weave. A pair of carvers to anchor the ends of a French-style dining table in an interior render.
A French round-back carver with the frame left in a grey, weathered oak, its circular back panel and curved seat covered in pale linen and trimmed with close nailheads. Turned and fluted legs, small carved paterae at the joints. Modeled in 3ds Max (.max) with V-Ray for the limed timber and linen. A carver for a rustic-elegant dining table or a dressing-area render.
A Louis-style carver in a limed, chalky-white finish, its oval back and rounded seat wrapped in tan leather that has aged to a warm patina. Scrolled arms, carved rosettes at the shoulders and fluted tapered legs. Modeled in 3ds Max (.max) with V-Ray for the worn leather and washed timber. A desk or occasional chair for a French-country study or classic dining-room render.
Open arms and a low shaped back make this a compact fireside chair, its white-painted frame set on cabriole legs and covered in a brown-and-cream ticking stripe with a boxed seat cushion. Oval pads sit on the arm rests. Built in 3ds Max (.max) and rendered with V-Ray for the painted timber and striped weave. A bedroom corner or classic sitting-room accent in an interior render.